Part 1, Structural Characteristics

By the hard-glass cavity, the electrode consists of three parts.

1. Some of the hard glass; components of the material produced by the GG17 into a discharge tube, water kits, storage units and the composition of the trachea and back. Sealed off CO2 lasers are usually three-casing structure. Inside the discharge tube is in the middle is a set of the net water, the outside layer of gas is set to return to the trachea is connected to gas discharge tube and pipe.

2. Cavity: from parts of the all-mirror mirror the composition and output. Cavity of the all-mirror optical glass for the general to the basement, the gold cross on the surface membrane, the membrane mirror 10.6um in the vicinity of the reflection rate of 98%; cavity output mirror can be used in general 10.6um transmission of infrared radiation materials Germanium (Ge) for the basement, above the cross made of multi-media and film.

3. Part of the electrode: CO2 lasers commonly used cold cathode, for the cylindrical shape, the cathode material of choice for laser life have great impact on the cathode material is a basic requirement: low sputtering rate, the rate of absorption of small gas, commonly used in metal Materials for nickel.

Part 2, Usage

1. The first line of electrodes then,(+,-) very good not to take wrong.

2. Then the cooling water pipes, connected to water from the anode, cathode and water into the next meet on the principle, and the interface can not be leaking. The use of water before the inner need to store enough water, the water after the water pipe can be used to be the weather bubble (every time before use must see).

3. User recommendations in the laser tube is a net addition of the water cycle system automatically detects the device to prevent the laser tube in the water as a result of the work and lead to overheating fault, please contact details of the laser machine suppliers.

Part 3, Maintenance

1. Every time before use must-see whether or not the normal water cycle and no air bubbles.

2. Often negative view of the output mirror whether there is dust and oil, then if there is fat-free cotton stained with scrub ether, or combined effects of light and power. Will affect the life of the laser.

Part 4, Product Performance